Odontology implant system

    ARS 197,955.00 ARS 197,955.00 197955.0 ARS

    ARS 0.00

    El precio no incluye impuestos

    Esta combinación no existe.

    ADD to chart

    · It is intended to be used in Dental Implants, in all its stages, and in all types of patients.
    · This equipment has been design following international standards, in terms of perfomances and functions.
    · High quality motor and great torque, free of vibrations.
    · By using a key, you can access the maximum torque selection applied to the tool, between 5 and 45 N cm, or disabled.
    · Its adjustable electronic torque meter differentiates it from other equipment.
    · Both speed and torque are relative to the selected Reduction. Handpiece reduction: 16:1, 20:1 and 32:1, and digital speed selection, displayed on the display.

    MULTIFUNCTION FOOT CONTROL

    · Hands-free device for control and programs.
    · Heavy multifunction foot control for high stability.
    · Main control: It starts the motor in progressive mode (linear) mode or it can be programmed to operate as on/off mode.
    · Function: When pressed once, it alternates from one to the other. While holding down, navigate between the three programs of each function.
    · Turn: The micro motor tool has the possibility of inverting its rotation, using the DIRECT/REVERSE button on the keyboard, or "Turn" in the multifunction foot control.
    · The reverse direction of rotation is indicated on the screen and by an audible tone.
    · Pump: Press once, it will turn ON or OFF, when turns ON recalls the last flow rate. Keeping pressed, increase the flow; Off, On 25, On 50, On 75, On 100, Off. This is being represented on the display with 1, 2, 3, or 4 drops.

    PERISTALTIC PUMP

    Is located in the back of the equipment. Supply 15 ml/min to 45 ml/min for jobs that require it.

    CONTENTS

    - 1 Main Unit Control.
    - 1 Main Power Cable.
    - 1 Multifunction Foot Control.
    - 1 Brushless Micromotor.
    - 1 Sterilisable Headpiece Holder.
    - 3 Set Irrigation Tubes.
    - 1 User's Manual.
    (Handpieces are not included).

    TECHNICAL SPECIFICATIONS

    Unit Control:
    - Global Size: 270mm x 115mm x 230mm.
    - Power Input: 90Vac-240Vac 50/60Hz (Automatic).
    - Line Fuse: 2.5A/250V, 5mm x 20mm SB.
    - Nominal Power: 3W.
    - Maximum Power: 150W.
    - Screen: LCD - 5.5" (High Luminosity).
    - Weight: 2Kg.

    Pump:
    - Type: Peristaltic with 3 rollers.
    - Flow: 15-45ml/min including off.

    Multifunction Foot Control:
    - Global Size: 18mm x 13.5mm x 43mm.
    - Weight: 1.65Kg.
    - Protection grade: IPX4.

    Motor:
    - Rate: 500rpm, 50000 max.
    -Torque: 5 to 45 N.cm.


















      

    Documentación de Micromotor fisiodispenser para implantología odontológica

    Ver manual de uso
    Descargar certificado ANMAT

    Esta es una vista previa de los productos vistos recientemente por el usuario.
    Una vez que el usuario haya visto al menos un producto, este fragmento será visible.

    Productos vistos recientemente