Feas Electronica equipment power cable with American plug NEMA 5-15p 3 pin

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Articulated bracket to securely sustain a Feas Electronica multiparametric monitor. It has several degrees of freedom, since it allows the equipment to be rotated in a horizontal direction, on both sides and inclined anteriorly and posteriorly. It can be fixed to all types of walls. It is provided with all the supplies for its placement.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Bracket to securely hold the Feas Electronica multiparameter monitor. Allows the equipment to be rotated horizontally to both sides. It can be fixed to all types of walls. It is provided with all the supplies for its placement.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

This service includes the calibration of the equipment sent and the certification that the equipment is calibrated according to calibrated simulators and analyzers, both traceable to international standards.
If the equipment is not in conditions to be certified, we cannot issue the corresponding certificate. In that case the necessary repair of the equipment will be quoted to ensure the correct operation of the equipment, so it can be certified. Only if it is approved and a correct operation is achieved, certification will be carried out.

Catheter adapter cable for cardiac output - DB9M/G

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Video extension cable injected.

Length: 15 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Feas Electrónica adult cutaneous temperature sensor DB9M/G

The skin temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in Direct mode.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.80m.
Protection against ingress of liquids: IPX1

The temperature sensors must only work with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraphs and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Caja derivadora de parámetros que permite la conexión de dos transductores de presión invasiva, al mismo tiempo, en el monitor multiparamétrico. Uso exclusivo en monitor multiparamétrico Feas Electrónica, bajo supervisión de personal capacitado en el cuidado de la salud.

Parameter branch box that allows the connection of two invasive blood pressure transducer adapter cables and the interconnection cable with the fractional inspired oxygen (FiO2) measurement sensor at the same time on the monitor. Exclusive use in Feas Electrónica patient monitor, under supervision of trained health care personnel.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Parameter derivation box that allows the connection of the esophageal-rectal temperature sensor and the catheter adapter cable for cardiac output measurement at the same time on the monitor. Exclusive use in Feas Electrónica multiparametric monitor, under the supervision of personnel trained in health care.

The Derivation Boxes are designed to adapt the FEAS ELECTRÓNICA temperature sensors ref .: 1580, 1586, 1587 and 5871; and the catheter adapter cable ref .: 1581 to the Multipar LCD and PM9000 model monitors from Feas ELECTRÓNICA.

Protection against liquidos: IPX1
Length cable: 0,6 meters

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Parameter derivation box that allows the connection of two temperature sensors, both cutaneous and esophageal -rectal, and the catheter adapter cable for cardiac output measurement at the same time on the monitor. Exclusive use in Feas Electrónica multiparametric monitoring, under the supervision of personnel trained in health care.

The Derivation Boxes are designed to adapt the FEAS ELECTRÓNICA temperature sensors ref .: 1580, 1586, 1587 and 5871; and the catheter adapter cable ref .: 1581 to the Multipar LCD and PM9000 model monitors from Feas ELECTRÓNICA.

Protection against liquidos: IPX1
Length cable: 0,6 meters

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

The Innodisk vertical EDC 4000 adapts to any platform with an IDE connector and provides a quick and easy path upgrade. Designed for embedded industrial applications that require a quick boot process, the EDC 4000 efficiently updates the work environment and improves data transfer rates with read and write performances of up to 40MB and 20MB per second, respectively. The vertical EDC 4000 has 128MB capacity and 40-pin vertical connector packages.

The integrated disk card is a replacement for the central monitoring station.

Months Warranty: 3

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Accessory to connect the oxygen inspired fraction (FiO2) sensor to the patient circuit. Exclusive use in Feas Electronica multiparametric monitor.

The T-Adapter is designed to be used in conjunction with the oxygen sensor (ref. 10101) in measurement systems of Inspired oxygen fraction (FiO2).

SPECS
T adapter, technical characteristics 22mm (inner diameter, outlet) x 15mm (inner diameter, T) x 22mm (outer diameter, inlet), HDPE material (High Density Polyethylene).

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Disposable electrodes x 10 units
For patient cable.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

External battery power cord 12Vdc for vehicle

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Composed by:
1 humidity filter for sidestream capnography, Feas Electrónica
and two 13mm filters for sidestream capnography, Feas Electrónica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pair of filters to be used in sidestream capnography of Feas Electronica multiparametric monitors. The filters prevent the entry of particles to the components of the measurement system.
13 mm filter.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Grayhill trim knob. Replacement for rotary knob of the Multipair Monitor

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.