KNF Pump model NMP05L 6V DC SF948
Replacement suction pump for CO2 Modules, in multiparameter monitors. Exclusive use in Feas Electronic´s multiparameter monitor, with Optional CO2 Side Stream, brand Feas Electronica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Intraesophageal/rectal temperature sensor DB9M/G Feas Electrónica
Feas Electrónica Intraesophageal/rectal temperature sensor DB9M/G

The electronic esophageal-rectal temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in the esophagus or in the rectum.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.90m.
Protection against ingress of liquids: IPX2

The Temperature sensor should only be used with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraph and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Interconnection cable between Multipar and installation of Central Monitoring Station (DB9F-DB9F)
Cable to connect the multiparameter monitor to a wall connector of the installation of a Monitoring Central. They have a length of 1.5m and at both ends it has 1 female DB9 connector.
For use in multi-parameter monitors of Feas Electrónica brand, exclusively.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Installation and start-up of the Monitoring Center
It consists of carrying out the installation of the monitoring center and the connection with the Feas Electronica brand patient monitors.
Gray nylon KNOB FOR .250" electronic switch PUSHBUTTON
Grayhill trim knob. Replacement for rotary knob of the Multipair Monitor

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Filters kit of 13mm for sidestream capnography Feas Electrónica
Pair of filters to be used in sidestream capnography of Feas Electronica multiparametric monitors. The filters prevent the entry of particles to the components of the measurement system.
13 mm filter.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Feas Electrónica Sidestream CO2 Filter Kit
Composed by:
1 humidity filter for sidestream capnography, Feas Electrónica
and two 13mm filters for sidestream capnography, Feas Electrónica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
External battery power cord 12Vdc for vehicle
External battery power cord 12Vdc for vehicle

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Disposable electrodes x 10 units
Disposable electrodes x 10 units
For patient cable.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Disposable Oxygen Sensor T-adapter for FiO2, Feas Electrónica
Accessory to connect the oxygen inspired fraction (FiO2) sensor to the patient circuit. Exclusive use in Feas Electronica multiparametric monitor.

The T-Adapter is designed to be used in conjunction with the oxygen sensor (ref. 10101) in measurement systems of Inspired oxygen fraction (FiO2).

SPECS
T adapter, technical characteristics 22mm (inner diameter, outlet) x 15mm (inner diameter, T) x 22mm (outer diameter, inlet), HDPE material (High Density Polyethylene).

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Disk on module (DOM), 128MB IDE EDC 4000 40 pin vertical
The Innodisk vertical EDC 4000 adapts to any platform with an IDE connector and provides a quick and easy path upgrade. Designed for embedded industrial applications that require a quick boot process, the EDC 4000 efficiently updates the work environment and improves data transfer rates with read and write performances of up to 40MB and 20MB per second, respectively. The vertical EDC 4000 has 128MB capacity and 40-pin vertical connector packages.

The integrated disk card is a replacement for the central monitoring station.

Months Warranty: 3

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Derivation box for parameters of Temperature 1, Temperature 2 and Cardiac Output, DB9M connector
Parameter derivation box that allows the connection of two temperature sensors, both cutaneous and esophageal -rectal, and the catheter adapter cable for cardiac output measurement at the same time on the monitor. Exclusive use in Feas Electrónica multiparametric monitoring, under the supervision of personnel trained in health care.

The Derivation Boxes are designed to adapt the FEAS ELECTRÓNICA temperature sensors ref .: 1580, 1586, 1587 and 5871; and the catheter adapter cable ref .: 1581 to the Multipar LCD and PM9000 model monitors from Feas ELECTRÓNICA.

Protection against liquidos: IPX1
Length cable: 0,6 meters

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Derivation box for parameters of Temperature 1 and Cardiac Output, DB9M connector
Parameter derivation box that allows the connection of the esophageal-rectal temperature sensor and the catheter adapter cable for cardiac output measurement at the same time on the monitor. Exclusive use in Feas Electrónica multiparametric monitor, under the supervision of personnel trained in health care.

The Derivation Boxes are designed to adapt the FEAS ELECTRÓNICA temperature sensors ref .: 1580, 1586, 1587 and 5871; and the catheter adapter cable ref .: 1581 to the Multipar LCD and PM9000 model monitors from Feas ELECTRÓNICA.

Protection against liquidos: IPX1
Length cable: 0,6 meters

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Derivation box for parameters of Pressure 1, Pressure 2 and/or FiO2, DB9M connector
Parameter branch box that allows the connection of two invasive blood pressure transducer adapter cables and the interconnection cable with the fractional inspired oxygen (FiO2) measurement sensor at the same time on the monitor. Exclusive use in Feas Electrónica patient monitor, under supervision of trained health care personnel.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Derivation box for parameters of Pressure 1 and Pressure 2, DB9M connector
Caja derivadora de parámetros que permite la conexión de dos transductores de presión invasiva, al mismo tiempo, en el monitor multiparamétrico. Uso exclusivo en monitor multiparamétrico Feas Electrónica, bajo supervisión de personal capacitado en el cuidado de la salud.
Cutaneous temperature sensor for Adult/Pediatric/Neonate Feas Electrónica DB9M/G
Feas Electrónica adult cutaneous temperature sensor DB9M/G

The skin temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in Direct mode.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.80m.
Protection against ingress of liquids: IPX1

The temperature sensors must only work with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraphs and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Color video extension cable, 15m, injected

Video extension cable injected.

Length: 15 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Catheter adapter cable for cardiac output - DB9M/G
Catheter adapter cable for cardiac output - DB9M/G

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Calibration and Certificates of Equipment Calibration
This service includes the calibration of the equipment sent and the certification that the equipment is calibrated according to calibrated simulators and analyzers, both traceable to international standards.
If the equipment is not in conditions to be certified, we cannot issue the corresponding certificate. In that case the necessary repair of the equipment will be quoted to ensure the correct operation of the equipment, so it can be certified. Only if it is approved and a correct operation is achieved, certification will be carried out.