Pressure transducer Edwards PX260 that relay blood pressure information from a pressure monitoring catheter to a patient monitoring system.

Single TruWave disposable pressure transducer with 3cc flush device and IV set

Design features a straight fluid path across the pressure sensor for easy priming and minimal waveform distortion

Gold plated connector wires for high fidelity signal transfer

Snap-tab flush device designed for easy priming and square-wave testing

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pressure transducer adapter cable (DB9/G) to BD transducer

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pressure transducer adapter cable (DB9/G) to BD transducer Edwards

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Cable used to adapt the Utah type invasive blood pressure transducer to the patient monitoring system. Exclusive use in a Feas Electrónica multiparameter monitor, under the supervision of trained health care staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pressure transducer without adaptation B & D DTX plus TNF-R disposable
Feas Electronica Patient Monitor Accessory.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

The multifunctional and reusable Oximeter sensor is indicated for non-invasive monitoring by continuous sampling of arterial oxygen saturation and pulse rate of newborn patients (weighing less than 5 kg). It can be applied to the foot of the newborn patient. It can also be used in adult and pediatric patients, although the selected application site (finger or toe) should be appropriately sized.
This sensor is designed to be used exclusively in Feas electronica equipment.

It has a length of 1 meter.
Protection against liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pulse Oximeter Sensor, Adult, Disposable, DB9M/G, Feas ELECTRÓNICA , 520A

This oximetry sensor is used for adult patients (weighing more than 30 kg) to measure arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed to be used exclusively in Feas Electronica equipment.

It has a length of 1 meter.
Protection against liquids IPX1.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pulse Oximeter Sensor, Infant ( 3kg - 20kg ), Disposable, DB9M/G, 520I

Oximetry sensor is used for infant patient (weighing between 3kg and 20kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pulse Oximeter Sensor, Neonatal (< 3kg), Disposable, DB9M/G, Feas Electronica 520N

Oximetry sensor is used for neonatal patient (weight < 3kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pediatric pulse oximeter sensor DB9M/G

The Oximetry sensor is used for pediatric patient (weighing between 10kg and 50kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1.



The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pulse Oximeter Sensor, Pediatric, Finger, DB9M/G, Feas ELECTRÓNICA , 512H

The Oximetry sensor is used for pediatric patient (weight: 10kg-30kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pump for Feas Electrónica PNI OEM module

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

16-position rotary optical encoder or rotary knob for menu access on monitors Mod. Multipar from Feas Electrónica.
High reliability, with push button for Enter key or data confirmation16-position rotary optical encoder or rotary knob for menu access on monitors Mod. Multipar from Feas Electrónica.
High reliability, with push button for Enter key or data confirmation


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Self-adhesive polycarbonate of "SILENCE" key for Multipar keyboard

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Self-adhesive polycarbonate of key "ESC" for keyboard of Multipar

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Silicone hose to be connected at one end of the cuff used for non-invasive pressure measurement and at the other end to be connected to the multiparametric monitor. Its length is 3 meters, making it easy to carry out the measurement remotely to the equipment.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Solenoid valve, Koge KSV05B

Maximum current: <60 mA
Escape velocity: <6 seconds
Tightness: 3.0 mmHg / min
Maximum pressure: 300mmHg
Applications: blood pressure monitor, etc.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

The SpO2 extension cable is used to extend the length of the oxygen saturation (SpO2) sensor. It is indicated for all Feas Electrónica brand oximeter sensors.

Extension length: 3 meters.

Protection against ingress of liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Cable used to adapt the sensor output used for measuring inspired oxygen fraction (FiO2) to the patient monitoring system. Exclusive use in a Feas Electronica multiparameter monitor, under the supervision of trained health care personnel.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.