Mouse for Feas Electrónica equipment

The mouse should only be used with the following equipment: Polygraph for Electrophysiology and Hemodynamics studies model 1405, Polygraph for Hemodynamics studies model 1405 and Model 5032C Monitoring Center. The user is responsible for ensuring compatibility between the mouse and the computer.

Cable length: 1.5 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

The keyboard should only be used with the following equipment: Polygraph for Electrophysiology and Hemodynamics studies model 1405.

The keyboard is used to operate the menu, which allows you to select sweep speed, ECG gains, pressure range, enter cardiac output measurement, freeze curves, perform caliper measurements, print curves, etc.

Use the keyboard to enter text and numbers. You can also activate some functions and start programs using key combinations and the numeric keypad. It also has hotkeys or quick access keys to optimize the user interface.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Feas Electrónica reusable "Y" oximeter sensor DB9M/G 3043

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-tube resusable cuff for non-invasive blood pressure measurement.

Size: 6 to 11 cm of arm circumference.
With hose connector included.
For pediatric or neonatal patient.

This cuff is suitable for different brands of equipment and different equipment (multi-parameter monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector from the cuff that you will be replacing and use to replace the connector as the cuff that was delivered with your purchase.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Single tube reusable cuff for non-invasive blood pressure measurement.
Size: 46 to 66 cm arm circumference.
With hose connector included.
For adult patient and animal.
Suitable for human and animal patient.
Warranty: 3 months.
This bracelet is suitable for different brands of equipment and different equipment (multi-parameter patient monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector from the bracelet that you will be replacing and use to replace the connector as the bracelet that was delivered with your purchase.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable handle/ cuff for non-invasive blood pressure measurement.
Size: 27.5 to 36.5 cm in circumference.
With hose connector included
For adult patient

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way resusable cuff for non-invasive blood pressure measurement.
Size: 18 to 26 cm arm circumference.
With hose connector included.
For a small pediatric patient.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way resusable cuff for non-invasive blood pressure measurement.
Size: 18 to 26 cm arm circumference.
With hose connector included.
For a small pediatric patient.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable handle/ cuff for non-invasive blood pressure measurement.
Size: 23 to 33 cm in circumference.
With hose connector included
For adult patient

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way cuff, with hose connector included, reusable, for non-invasive blood pressure measurement.

Size: 10 to 19 cm in circumference. Neonatal patient.
Suitable for human and animal patient.
Warranty: 3 months.

This bracelet is suitable for different brands of equipment and different equipment (multiparameter monitors, defibrillators, blood pressure monitors). What you have to take into account is the connevtor that is at the end of the hose, which must be the same to be able to connect to the equipment. If the connector is not the same, then you can save the connector from the cuff it will replace the connector on the cuff that came with your purchase.

Synonymous names: Armband/ Cuff/ Chambers for non-invasive pressure

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Iron structure, which allows to maintain and move the preamplifier of hemodynamic studies through the procedure table. Use in Feas Electronica brand hemodynamic and electrophysiology polygraphs exclusively.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Feas Electrónica Intraesophageal/rectal temperature sensor DB9M/G

The electronic esophageal-rectal temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in the esophagus or in the rectum.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.90m.
Protection against ingress of liquids: IPX2

The Temperature sensor should only be used with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraph and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between signal retriever and Polygraph CPU

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between hemodynamic studies preamplifier and catheter extension box. They have variable lengths according to the installation of the equipment, use in hemodynamic polygraphs and electrophysiology of Feas Electronica brand exclusively.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between catheter extender and polygraph preamplifier

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Interconnection cable between CPU and preamplifier of Electrophysiology and Hemodynamic System with Optionals: / SpO2 / PNI for digital system
Connects the Polygraph Main Unit with the signal preamplifier box, which contains the connectors for the patient cables and sensors.
It is a cable, by default, 5m long, but you can request longer lengths by contacting our Customer Service for advice.
For exclusive use in Electrophysiology and Hemodynamic systems Mod. 1405, Feas Electrónica brand, for digital communication

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Ground wire between CPU and Electrophysiology and Hemodynamics Polygraph preamplifier, DIGITAL

The length of the cable is adaptable to the installation, with lengths of 5, 8, 9, 10, 11, 12, 13, 14, and 15mts.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Disposable electrodes x 10 units
For patient cable.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Feas Electrónica adult cutaneous temperature sensor DB9M/G

The skin temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in Direct mode.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.80m.
Protection against ingress of liquids: IPX1

The temperature sensors must only work with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraphs and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Catheter adapter cable for cardiac output - DB9M/G

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.