KNF Pump model NMP05L 6V DC SF948
Replacement suction pump for CO2 Modules, in multiparameter monitors. Exclusive use in Feas Electronic´s multiparameter monitor, with Optional CO2 Side Stream, brand Feas Electronica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Syringe infusion pump model SN-50C66T: one channel, standard support, with weight mode
Syringe infusion pump model SN-50C66T is a constant volume, channel and speed controlled infusion pump. It is characterized by high precision, stable flow rate and low dosage.

It is used particularly for the infusion of sodium nitroprusside, dopamine, propofol and antibiotics for acute and serious illnesses. The pump has multiple types of alarm functions to ensure a safe and reliable infusion process.

This product is used to clinically control the flow and velocity of fluids (drugs, nutrients, and blood) infused into the patient's body for safer use.

GENERAL CHARACTERISTICS
* The equipment can store customized syringe information from 33 different manufacturers, Weigao and 32 other manufacturers, configurable by the user.
* SN-50C66T pump can use sterile and disposable syringes of 5ml, 10ml, 20ml, 30ml or 50ml. Automatically recognizes the syringe in place.
* The equipment can store up to 2000 historical infusion records, which include the following information: injection mode, injection rate, alarm information, total volume injected, threshold value of the occlusion pressure limit of the path, limiting quantity, number of syringe and information of the operation.
* It has the following alarm functions:
Incorrect position of the syringe.
Residual limit.
Occlusion.
End of injection.
No operation.
From empty syringe.
Flow limit exceeded.
Plunger decoupled.
Power cord disconnected.
Discharged battery.
Dead battery.
System error.
* Battery operating time: starting from a full charge, the battery can support 6 hours of operation on one channel at a rate of 5 ml / h.
* Allows operation and battery charging from the car's 12Vdc connector.
* Intended User: Adult, Pediatric, Neonatal

TECHNICAL SPECIFICATIONS
* Dimensions:
306mm x 140mm x 146mm (Length x Width x Height)
* Weight: 2.25kg (includes support).
* Electrical feeding:
AC input: 100V to 240V, 50/60 Hz.
DC input: 12Vdc.
Battery voltage: 12Vdc.
Nominal power: 40 VA.

CERTIFICATES:
* Quality standards:
ISO13485
Disp. A.N.M.A.T. 3266/2013: B.P.F.
Disp. A.N.M.A.T. 2319/02
* Safety rules:
UNE-EN 60601-1. (Eq. IRAM 4220-1 and IEC 601-1), Class I - Prot. Desc. Elect .: CF
UNE-EN 60601-1-2 (Electromagnetic Compatibility).
Authorized by the A.N.M.A.T .: PM 1125-18.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Bag for AED, Red (indeer use) 28 x 24 x 6 cm, Feas Electrónica
Automatic External Defibrillators (AEDs) bag.
It is intended to contain an automatic defibrillator and its accessories, during transport.
It can be used with various brands of AED Defibrillators and it is easily identifiable.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Battery pack non-rechargable Li-MnO2 12Vcc/4200mAh for AED Feas Electrónica, Model Heart+ResQ
Non-rechargeable battery for AED Feas Electrónica, model Heart + ResQ NT-381.C
Item code: 19122
Type: Battery
Technology: Li-MnO2
Model: Original
Voltage: 12Vcc
Capacity: 4200mAh
Weight (kg): 0.260

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pressure transducer without adaptation B & D DTX plus TNF-R disposable
Pressure transducer without adaptation B & D DTX plus TNF-R disposable
Feas Electronica Patient Monitor Accessory.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pressure transducer Edwards PX260
Pressure transducer Edwards PX260 that relay blood pressure information from a pressure monitoring catheter to a patient monitoring system.

Single TruWave disposable pressure transducer with 3cc flush device and IV set

Design features a straight fluid path across the pressure sensor for easy priming and minimal waveform distortion

Gold plated connector wires for high fidelity signal transfer

Snap-tab flush device designed for easy priming and square-wave testing

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pressure transducer DTX plusDT-4812 disposable, ref. 682000 version A
Pressure transducer DTX plusDT-4812 disposable

Single Line, 60 Inch Pressure Tubing, Pressure Range -30 to +300 mmHg
Microdrip Chamber, 3 Way Stopcock, Zeroing Stopcock.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Adult and pediatric water trap for sidestream Capnography and anesthetic gases, Feas Electrónica
Disposable accessory, which prevents moisture from entering the equipment and connects the patient circuit line to the monitoring system. It can be reused as long as it is disinfected. It is implemented in adult and pediatric patients in a Feas Electrónica multiparameter monitor, under the supervision of trained health care staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Neonatal water trap for sidestream capnography and anesthetic gases, Feas Electrónica
Disposable accessory, which prevents moisture from entering the equipment and connects the patient circuit line to the monitoring system. It can be reused as long as it is disinfected. It is implemented in adult and pediatric patients in a Feas Electrónica multiparameter monitor, under the supervision of trained health care staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
PS2 Keyboard for Model 1405 Electrophysiology Polygraph
The keyboard should only be used with the following equipment: Polygraph for Electrophysiology and Hemodynamics studies model 1405.

The keyboard is used to operate the menu, which allows you to select sweep speed, ECG gains, pressure range, enter cardiac output measurement, freeze curves, perform caliper measurements, print curves, etc.

Use the keyboard to enter text and numbers. You can also activate some functions and start programs using key combinations and the numeric keypad. It also has hotkeys or quick access keys to optimize the user interface.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Keyboard for Feas Electrónica equipment
Keyboard for Feas Electrónica equipment, used mainly in monitoring central station and polygraphs for hemodynamic studies.

The keyboard must only be used with the following equipment: Polygraph for hemodynamic studies model 1405 and Monitoring Central Station model 5032C. The user is responsible for ensuring compatibility between the keyboard and any other equipment.

Cable length: 1.5 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self Adhesive keypad for Defibrillator 3850B Monophasic, Feas Electrónica
Adhesive keypad for Defibrillator 3850B Monophasic, Feas Electrónica

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self adhesive keypad with alarm leds for Defibrillator 3850B Monophasic Feas Electrónica
Self-adhesive keyboard in English or Spanish with alarm LEDs for Defibrillator 3850B Monophasic Feas Electronica. To ensure the compatibility of the replacement we will ask you for the serial number of the equipment in which it will be used.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self Adhesive keypad for Defibrillator 3850B Biphasic Feas Electrónica
Self-adhesive keyboard in English or Spanish for Defibrillator 3850B Biphasic Feas Electronica. To ensure the compatibility of the replacement we will ask you for the serial number of the equipment in which it will be used.



The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self-adhesive keyboard with LEDs for 3600 Defibrillator
Self-Adhesive keypad for Defibrillator 3600

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Plastic holder for the micromotor of the Odontology implant system
Plastic holder for the micromotor of the Odontology implant system

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Clamp electrodes for adult patients
Clamp electrodes set for adult patient.
Visual color code according to IEC standards. Color coding: Red R, Yellow L, Green F, Black N.
Product only suitable for use by health personnel and health institutions.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Clamp electrodes for pediatric patients
4 Clamp electrodes to perform electrocardiograms in pediatric patients.
Visual color code according to IEC standards. Color coding: Red R, Yellow L, Green F, Black N.
Only suitable for use by health professionals.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Spike Set Sino MDT Ltd
Spike Set SINO MDT Ltd for enteral feeding pump.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Reusable “Y” Sensor, Neonatal, Foot, Feas ELECTRÓNICA , 518B
The multifunctional and reusable Oximeter sensor is indicated for non-invasive monitoring by continuous sampling of arterial oxygen saturation and pulse rate of newborn patients (weighing less than 5 kg). It can be applied to the foot of the newborn patient. It can also be used in adult and pediatric patients, although the selected application site (finger or toe) should be appropriately sized.
This sensor is designed to be used exclusively in Feas electronica equipment.

It has a length of 1 meter.
Protection against liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.