Paper compartment door for Comen ECG, model CM300

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Palco soft oximeter sensor, adult, with connector DB9F

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pair of gray electrodes, 95 mm in diameter, for pacemakers.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pacer electrode cable 2 pin 2mm - DB9M/G

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Pacemaker character cable (2 socket 2mm protected - 2 pin bananas macho 2mm unprotected)
Length: 1 meter.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Mouse for Feas Electrónica equipment

The mouse should only be used with the following equipment: Polygraph for Electrophysiology and Hemodynamics studies model 1405, Polygraph for Hemodynamics studies model 1405 and Model 5032C Monitoring Center. The user is responsible for ensuring compatibility between the mouse and the computer.

Cable length: 1.5 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

The keyboard should only be used with the following equipment: Polygraph for Electrophysiology and Hemodynamics studies model 1405.

The keyboard is used to operate the menu, which allows you to select sweep speed, ECG gains, pressure range, enter cardiac output measurement, freeze curves, perform caliper measurements, print curves, etc.

Use the keyboard to enter text and numbers. You can also activate some functions and start programs using key combinations and the numeric keypad. It also has hotkeys or quick access keys to optimize the user interface.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

PRODUCT DESCRIPTION
Patient cable DB9M / G Feas Electrónica
It has 5 button-type clasps.
The length of the cable is 3.5 meters.
Type CF equipment protected against defibrillation.
For equipment such as Monitors and defibrillators Brand Feas electronica.
Warranty: 3 months.

OTHER PRODUCT NAMES
Patient Cable / 10 Lead Cable / ECG Cable / Electrocardiogram Cable

What places do you ship to?
We ship to all provinces of Argentina and abroad.

For other questions about the product please contact us.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Patient cable DB9M / G Feas Electrónica
It has 3 mini colored clips, for Neonatal use
Leads Colors: IEC Standard (European)
The length of the cable is 3.2 meters.
Type CF equipment protected against defibrillation.
For equipment such as Monitors and defibrillators Brand Feas electrónica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

GENERAL CHARACTERISTICS
The PACE 101 single-chamber cardiac pacemaker has the reputation of a legendary workhorse - easy to operate, very durable and light weight. It is intended for temporary atrial or ventricular pacing and supports synchronous (VVI, AAI) and asynchronous (V00, A00) operating modes.

Features:
-Basic stimulation frequency up to 180 ppm.
-Large rotating dials for stimulation frequency, sensitivity, amplitude and pacing mode.
-Rapid atrial pacing up to 720 ppm.
-Long battery lifetime: up to 38 days of operation with a single 9V Alkaline battery.
-Four rotational dials for setup up stimulation frequency, amplitude, sensitivity, and pacing mode.
-Sensed intrinsic activity and paced pulses are indicated optically by a light-emitting diode (LED). Additionally, acoustic signals for sensing and pacing events can be switched on and off.
-Automatic surveillance of battery charge condition. Low battery status is indicated optically by a separate LED labeled 'Low Batt./Error' and acoustically by a warning beep.
-Internal error detection. A device error or defect is indicated by a separate LED labeled 'Low Batt./Error'.
-Run-away protection. The stimulation frequency is limited to a maximum of 180 ppm.
-Protective cover of dials. A protective cover safeguards against accidental changes to the device settings.
Protected terminals in combination with the Series XI Extension Cables ensure touch-proof connection of pacemaker and pacing lead system.

TECHNICAL SPECIFICATIONS
- Dimensions: 6 cm x 11.5 cm x 2.2 cm.
- Weight: 170 g (battery included).
- Alkaline battery: 38 days (72 ppm, 8V).
- Basic stimulation range: 30-180 ppm.
- Rapid stimulation range: basic range x2 or x4 (up to 720 ppm).
- Stimulation amplitude: 0.3 - 12 V.
- Pulse width: 0.75 ms.
- Sensitivity: 1.0 mV at 20 mV, asynchronous.
- Refractory period: 250 ms.
- Protection against uncontrolled running: 200 ± 10 [1 / min].
- Ways of marcapaseo: VVI, VOO, AAI, AOO.

INCLUDED ACCESORIES
- Extension cable.
- User's manual.
- Arm Strap.
- Plastic equipment bag.

OPTIONAL GADGETS
Myocardial heartwires for temporary pacing (unipolar, bipolar)•
Transvenous pacing leads for minimally invasive temporary pacing applications•
Extension cables for temporary pacing leads

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Oxygen sensor with tongue clips for veterinary use. D9MG, Feas Electronica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Sensor used for the measurement of Fraction inspired by oxygen, this measurement is carried out by an electrochemical cell which useful life is of 2 years from the moment of its opening.

The Feas Electrónica O2 sensor is designed as an oxygen sensing element of the Multipar LCD and PM9000 Feas Electrónica Patient Monitor models and measures the oxygen concentration in gas mixtures breathed by the patient.
Use is limited to system monitoring and should be used only by qualified personnel.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Feas Electrónica reusable "Y" oximeter sensor DB9M/G 3043

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

· It is intended to be used in Dental Implants, in all its stages, and in all types of patients.
· This equipment has been design following international standards, in terms of perfomances and functions.
· High quality motor and great torque, free of vibrations.
· By using a key, you can access the maximum torque selection applied to the tool, between 5 and 45 N cm, or disabled.
· Its adjustable electronic torque meter differentiates it from other equipment.
· Both speed and torque are relative to the selected Reduction. Handpiece reduction: 16:1, 20:1 and 32:1, and digital speed selection, displayed on the display.

MULTIFUNCTION FOOT CONTROL

· Hands-free device for control and programs.
· Heavy multifunction foot control for high stability.
· Main control: It starts the motor in progressive mode (linear) mode or it can be programmed to operate as on/off mode.
· Function: When pressed once, it alternates from one to the other. While holding down, navigate between the three programs of each function.
· Turn: The micro motor tool has the possibility of inverting its rotation, using the DIRECT/REVERSE button on the keyboard, or "Turn" in the multifunction foot control.
· The reverse direction of rotation is indicated on the screen and by an audible tone.
· Pump: Press once, it will turn ON or OFF, when turns ON recalls the last flow rate. Keeping pressed, increase the flow; Off, On 25, On 50, On 75, On 100, Off. This is being represented on the display with 1, 2, 3, or 4 drops.

PERISTALTIC PUMP

Is located in the back of the equipment. Supply 15 ml/min to 45 ml/min for jobs that require it.

CONTENTS

- 1 Main Unit Control.
- 1 Main Power Cable.
- 1 Multifunction Foot Control.
- 1 Brushless Micromotor.
- 1 Sterilisable Headpiece Holder.
- 3 Set Irrigation Tubes.
- 1 User's Manual.
(Handpieces are not included).

TECHNICAL SPECIFICATIONS

Unit Control:
- Global Size: 270mm x 115mm x 230mm.
- Power Input: 90Vac-240Vac 50/60Hz (Automatic).
- Line Fuse: 2.5A/250V, 5mm x 20mm SB.
- Nominal Power: 3W.
- Maximum Power: 150W.
- Screen: LCD - 5.5" (High Luminosity).
- Weight: 2Kg.

Pump:
- Type: Peristaltic with 3 rollers.
- Flow: 15-45ml/min including off.

Multifunction Foot Control:
- Global Size: 18mm x 13.5mm x 43mm.
- Weight: 1.65Kg.
- Protection grade: IPX4.

Motor:
- Rate: 500rpm, 50000 max.
-Torque: 5 to 45 N.cm.



















The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Battery suitable for automated external defibrillators such as Zoll automated external defibrillator

Hoses for non-invasive pressure cuff, KTMED
With two quick couplings 3 meters long.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-tube resusable cuff for non-invasive blood pressure measurement.

Size: 6 to 11 cm of arm circumference.
With hose connector included.
For pediatric or neonatal patient.

This cuff is suitable for different brands of equipment and different equipment (multi-parameter monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector from the cuff that you will be replacing and use to replace the connector as the cuff that was delivered with your purchase.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

Single tube reusable cuff for non-invasive blood pressure measurement.
Size: 46 to 66 cm arm circumference.
With hose connector included.
For adult patient and animal.
Suitable for human and animal patient.
Warranty: 3 months.
This bracelet is suitable for different brands of equipment and different equipment (multi-parameter patient monitors, defibrillators, blood pressure monitors). What must be taken into account is the connector at the end of the hose, which must be the same in order to connect to the equipment. If the connector is not the same, then you can save the connector from the bracelet that you will be replacing and use to replace the connector as the bracelet that was delivered with your purchase.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable Handle/Cuff for non-invasive blood pressurre measurement.
Size: 35,5 to 46 cm in circunference.
With hose connector included.
For adult patient.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.

One-way reusable handle/ cuff for non-invasive blood pressure measurement.
Size: 27.5 to 36.5 cm in circumference.
With hose connector included
For adult patient

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.