Monthly rent - Odontology implant system
Includes equipment rental. For different rental periods, please consult.
IMPORTANT:The equipment must return in good condition or with wear and tear according to the normal use of the equipment. For the realization of this service, the delivery of a check or promissory note for the value of the equipment will be requested as a guarantee or ask for some other way of guaranteeing.
· It is intended to be used in Dental Implants, in all its stages, and in all types of patients.
· This equipment has been design following international standards, in terms of perfomances and functions.
· High quality motor and great torque, free of vibrations.
· By using a key, you can access the maximum torque selection applied to the tool, between 5 and 45 N cm, or disabled.
· Its adjustable electronic torque meter differentiates it from other equipment.
· Both speed and torque are relative to the selected Reduction. Handpiece reduction: 16:1, 20:1 and 32:1, and digital speed selection, displayed on the display.
MULTIFUNCTION FOOT CONTROL
· Hands-free device for control and programs.
· Heavy multifunction foot control for high stability.
· Main control: It starts the motor in progressive mode (linear) mode or it can be programmed to operate as on/off mode.
· Function: When pressed once, it alternates from one to the other. While holding down, navigate between the three programs of each function.
· Turn: The micro motor tool has the possibility of inverting its rotation, using the DIRECT/REVERSE button on the keyboard, or "Turn" in the multifunction foot control.
· The reverse direction of rotation is indicated on the screen and by an audible tone.
· Pump: Press once, it will turn ON or OFF, when turns ON recalls the last flow rate. Keeping pressed, increase the flow; Off, On 25, On 50, On 75, On 100, Off. This is being represented on the display with 1, 2, 3, or 4 drops.
PERISTALTIC PUMP
Is located in the back of the equipment. Supply 15 ml/min to 45 ml/min for jobs that require it.
CONTENTS
- 1 Main Unit Control.
- 1 Main Power Cable.
- 1 Multifunction Foot Control.
- 1 Brushless Micromotor.
- 1 Sterilisable Headpiece Holder.
- 3 Set Irrigation Tubes.
- 1 User's Manual.
(Handpieces are not included).
TECHNICAL SPECIFICATIONS
Unit Control:
- Global Size: 270mm x 115mm x 230mm.
- Power Input: 90Vac-240Vac 50/60Hz (Automatic).
- Line Fuse: 2.5A/250V, 5mm x 20mm SB.
- Nominal Power: 3W.
- Maximum Power: 150W.
- Screen: LCD - 5.5" (High Luminosity).
- Weight: 2Kg.
Pump:
- Type: Peristaltic with 3 rollers.
- Flow: 15-45ml/min including off.
Multifunction Foot Control:
- Global Size: 18mm x 13.5mm x 43mm.
- Weight: 1.65Kg.
- Protection grade: IPX4.
Motor:
- Rate: 500rpm, 50000 max.
-Torque: 5 to 45 N.cm.
The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.