Free shipping in the city of Córdoba for purchases over U$D 200

Aggregate of Mainstream Capnography module for Multiparameter Patient Monitor LCD
If you are interested in buying the module, we suggest that you send us the equipment serial number beforehand to ensure compatibility and verify that the module can be added to your equipment. When purchasing this module you must send the equipment to the factory to make the corresponding modifications.

MAINSTREAM CAPNOGRAPHY
Measurement of EtCO2, FiCO2 and Respiratory Rate.
Range: CO2, from 0 to 100 mmHg (0% to 13%).
Respiratory Rate, 4 to 150 1/min.
Accuracy: ±2 mmHg from 0 to 40 mmHg.
±5% of reading from 41 to 70 mmHg.
Resolution: 1 mmHg.
Calibration: only zero (room air).
Compensation for temperature and atmospheric pressure, O2 y N2O.
Warm-up time <15s, to start measuring, within 2 minutes to obtain values consistent with the specifications.
Waveform response time: less than 60ms.

ACCESSORIES
Reusable airway adapter for Mainstream Capnography sensor, quantity 1.
Mainstream capnography sensor, quantity 1.
Adapter cable for Mainstream Capnography sensor, quantity 1.



The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Aggregate of sidestream capnography module for LCD Multiparametric Monitor
If you are interested in buying the module, we suggest that you send us the equipment serial number beforehand to ensure compatibility and verify that the module can be added to your equipment. When purchasing this module you must send the equipment to the factory to make the corresponding modifications.

SIDESTREAM CAPNOGRAPHY
Measurement of EtCO2, FiCO2 and Respiratory Rate.
Range: CO2, from 0 to 100 mmHg (0% to 13%).
Respiratory Rate, 4 to 170 1/min.
Accuracy: CO2, ±2 mmHg for CO2 < 5%.
< 10% of reading for CO2 > 5%.
Resolution: CO2, 1mmHg.
Respiratory Rate, 1 1/min.
Alarm: FiCO2, EtCO2 minimum and maximum, 0 to 100mmHg and off.
Respiratory Rate minimum and maximum, 0 to 170 1/min and off.
Two calibration points: zero (room air) and gains (5% or 10%).
Compensation for temperature and atmospheric pressure, O2 y N2O.

ACCESSORIES
""T"" type nozzle for sidestream capnography Feas Electrónica, quantity 2.
Moisture filter for sidestream capnography Feas Electrónica, quantity 2.
Patient line of 2.4 m for sidestream capnography Feas Electrónica, quantity 2.
Filters kit of 13mm for sidestream capnography Feas Electrónica, quantity 1.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Aggregate of sidestream capnography module + N2O + anesthetic gases for LCD Multiparametric Monitor
If you are interested in buying the module, we suggest that you send us the equipment serial number beforehand to ensure compatibility and verify that the module can be added to your equipment. When purchasing this module you must send the equipment to the factory to make the corresponding modifications.

SIDESTREAM CAPNOGRAPHY WITH ANESTHETIC GASES MEASUREMENT
Measurement of EtCO2, FiCO2 and Respiratory Rate.
Range: CO2, from 0 to 100 mmHg (0% to 13%).
Respiratory Rate, 4 to 150 1/min.
Accuracy: CO2, ±3%ABS.
Resolution: CO2, 1 mmHg.
Respiratory Rate, 1 1/min.
Alarm: FiCO2, EtCO2 minimum and maximum, 0 to 100 mmHg and off.
Respiratory Rate minimum and maximum, 0 to 150 1/min and off.
Measurement of N2 O: from 0% to 100%.
Automatic detection and measurement of up two anesthetic gases: Halothane, Enflurane,
Isoflurane, Sevoflurane and Desflurane.
- Range: 0% to 30%.
- Accuracy: ±8%REL.
- Resolution: 0.1%.
Flowrate: 70 to 120 ml/min for neonatal patients.
120 to 250 ml/min for adult patients.

ACCESSORIES
Tubing straight airway adapter for sidestream capnography Feas Electrónica, quantity 2.
2.4 m CO2 samplig lines for sidestream capnography Feas Electrónica, quantity 2.
Water trap for use in sidestream capnography with anesthetic gases, quantity 2.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Aggregate Battery module for LCD multiparmetric monitor
If you are interested in buying the module, we suggest that you send us the equipment serial number beforehand to ensure compatibility and verify that the module can be added to your equipment. When purchasing this module you must send the equipment to the factory to make the corresponding modifications.

BATTERY
14.4V / 8.8Ah Li-ion battery.
Autonomy: 4 hours.
Battery state indication (empty, full, on charge) on screen.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Agreggate 4 patient module for central monitoring station
This module allows you to expand your central monitoring station. When incorporated it will display 4 more beds in the same central.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Disposable Oxygen Sensor T-adapter for FiO2, Feas Electrónica
Accessory to connect the oxygen inspired fraction (FiO2) sensor to the patient circuit. Exclusive use in Feas Electronica multiparametric monitor.

The T-Adapter is designed to be used in conjunction with the oxygen sensor (ref. 10101) in measurement systems of Inspired oxygen fraction (FiO2).

SPECS
T adapter, technical characteristics 22mm (inner diameter, outlet) x 15mm (inner diameter, T) x 22mm (outer diameter, inlet), HDPE material (High Density Polyethylene).

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pressure transducer DTX plusDT-4812 disposable, ref. 682000 version A
Pressure transducer DTX plusDT-4812 disposable

Single Line, 60 Inch Pressure Tubing, Pressure Range -30 to +300 mmHg
Microdrip Chamber, 3 Way Stopcock, Zeroing Stopcock.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
AC inlet EMI/RFI filter 04SS3A-2SR-Q fused 4A-250VAC RoHS H&L corp-PN: 530040302014100
EMI/RFI filter 04SS3A-2SR-Q, 4A 250VAC-PN: 530040302014100

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Disk on module (DOM), 128MB IDE EDC 4000 40 pin vertical
The Innodisk vertical EDC 4000 adapts to any platform with an IDE connector and provides a quick and easy path upgrade. Designed for embedded industrial applications that require a quick boot process, the EDC 4000 efficiently updates the work environment and improves data transfer rates with read and write performances of up to 40MB and 20MB per second, respectively. The vertical EDC 4000 has 128MB capacity and 40-pin vertical connector packages.

The integrated disk card is a replacement for the central monitoring station.

Months Warranty: 3

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Rotary opto encoder 16 position (trim knob) 61C Series
16-position rotary optical encoder or rotary knob for menu access on monitors Mod. Multipar from Feas Electrónica.
High reliability, with push button for Enter key or data confirmation16-position rotary optical encoder or rotary knob for menu access on monitors Mod. Multipar from Feas Electrónica.
High reliability, with push button for Enter key or data confirmation


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self-adhesive polycarbonate of "SILENCE" key for Multipar keyboard
Self-adhesive polycarbonate of "SILENCE" key for Multipar keyboard

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Self-adhesive polycarbonate of key "ESC" for keyboard of Multipar
Self-adhesive polycarbonate of key "ESC" for keyboard of Multipar

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Gray nylon KNOB FOR .250" electronic switch PUSHBUTTON
Grayhill trim knob. Replacement for rotary knob of the Multipair Monitor

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pediatric pulse oximeter with Clamp and DB9M/G, Feas Electrónica 3178
Pediatric pulse oximeter with Clamp and DB9M/G, Feas Electrónica 3178

The reusable finger sensor is used in oximetry monitoring systems to non-invasively determine Oxygen saturation (SpO2), pulse rate, and pulse plethysmographic waves.

The reusable pediatric finger sensor is recommended for:
• Patients weighing more than 5Kg and less than 45Kg.
• Patients with limited activity.
• For sampling.

The reusable pediatric finger sensor is not recommended for long-term use. For long-term patient monitoring, use disposable single-patient or wrap-around type sensors.
It has a length of 1 meter.
Protection against liquids IPX1.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Adult Oximeter Finger Sensor DB9M/G Feas Electrónica
Adult Oximeter Finger Sensor DB9M/G Feas Electrónica

The Oximeter sensor is applicable to adult patients (weighing more than 30kg), for non-invasive measurement by continuous sampling of arterial oxygen saturation and pulse rate, in Oximetry Monitoring Systems. This sensor is designed to be used exclusively in Feas Electronica equipment.

It has a length of 2.5 meters.
Protection against liquids: IPX1.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Adult pulse oximeter sensor with clamp and DB9M/G 3444, Feas Electrónica
Adult pulse oximeter sensor with clamp and DB9M/G 3444, Feas Electrónica

The reusable finger sensor Feas ELECTRONICA ref. 5043 is used to non-invasively determine oxygen saturation (SpO2), pulse rate, and pulse plethysmographic waves. It is indicated for:
• Patients who weigh more than 15Kg.
• Patients with limited activity.

The reusable finger sensor is not recommended for prolonged use, unless the integrity of the skin is checked frequently and the application site is changed accordingly. For long-term patient monitoring, use either single-patient disposable sensors or Velcro-strap sensors.
It has a length of 1 meter.
Protection against liquids IPX1.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Neonatal oximeter sensor DB9M/G Feas Electrónica 3026
Neonatal oximeter sensor DB9M/G Feas Electronica 3026.

This sensor is used in oximetry monitoring systems to non-invasively determine Percent Oxygen Saturation (SpO2), pulse rate, and pulse plethysmographic waves.
Its use is indicated for patients of less than 3kg.

It has a length of 40 cm.
Protection against liquids IPX1.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Oxygen sensor with tongue clips for veterinary use. D9MG, Feas Electrónica. 551A
Oxygen sensor with tongue clips for veterinary use. D9MG, Feas Electronica.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.