Free shipping to Córdoba for purchases over U$D 200

Pressure transducer adapter cable (DB9/G) to BD transducer
Pressure transducer adapter cable (DB9/G) to BD transducer

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pressure transducer without adaptation B & D DTX plus TNF-R disposable
Pressure transducer without adaptation B & D DTX plus TNF-R disposable
Feas Electronica Patient Monitor Accessory.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pressure transducer Edwards PX260
Pressure transducer Edwards PX260 that relay blood pressure information from a pressure monitoring catheter to a patient monitoring system.

Single TruWave disposable pressure transducer with 3cc flush device and IV set

Design features a straight fluid path across the pressure sensor for easy priming and minimal waveform distortion

Gold plated connector wires for high fidelity signal transfer

Snap-tab flush device designed for easy priming and square-wave testing

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Adult and pediatric water trap for sidestream Capnography and anesthetic gases, Feas Electrónica
Disposable accessory, which prevents moisture from entering the equipment and connects the patient circuit line to the monitoring system. It can be reused as long as it is disinfected. It is implemented in adult and pediatric patients in a Feas Electrónica multiparameter monitor, under the supervision of trained health care staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Neonatal water trap for sidestream capnography and anesthetic gases, Feas Electrónica
Disposable accessory, which prevents moisture from entering the equipment and connects the patient circuit line to the monitoring system. It can be reused as long as it is disinfected. It is implemented in adult and pediatric patients in a Feas Electrónica multiparameter monitor, under the supervision of trained health care staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Keyboard for Feas Electrónica equipment
Keyboard for Feas Electrónica equipment, used mainly in monitoring central station and polygraphs for hemodynamic studies.

The keyboard must only be used with the following equipment: Polygraph for hemodynamic studies model 1405 and Monitoring Central Station model 5032C. The user is responsible for ensuring compatibility between the keyboard and any other equipment.

Cable length: 1.5 meters.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Plastic holder for the micromotor of the Odontology implant system
Plastic holder for the micromotor of the Odontology implant system

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Reusable “Y” Sensor, Neonatal, Foot, Feas ELECTRÓNICA , 518B
The multifunctional and reusable Oximeter sensor is indicated for non-invasive monitoring by continuous sampling of arterial oxygen saturation and pulse rate of newborn patients (weighing less than 5 kg). It can be applied to the foot of the newborn patient. It can also be used in adult and pediatric patients, although the selected application site (finger or toe) should be appropriately sized.
This sensor is designed to be used exclusively in Feas electronica equipment.

It has a length of 1 meter.
Protection against liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Intraesophageal/rectal temperature sensor DB9M/G Feas Electrónica
Feas Electrónica Intraesophageal/rectal temperature sensor DB9M/G

The electronic esophageal-rectal temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in the esophagus or in the rectum.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.90m.
Protection against ingress of liquids: IPX2

The Temperature sensor should only be used with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraph and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Temperature sensor Feas Electrónica- PLUG 6.5mm
Feas Electrónica temperature sensor - PLUG 6.5mm

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Cutaneous temperature sensor for Adult/Pediatric/Neonate Feas Electrónica DB9M/G
Feas Electrónica adult cutaneous temperature sensor DB9M/G

The skin temperature probe or sensor is used in monitoring systems to measure body temperature in critical patients, in Direct mode.
In addition, the probe can be used to measure the injected temperature in Cardiac Output.

Sensor cable length: approximately 2.80m.
Protection against ingress of liquids: IPX1

The temperature sensors must only work with the following equipment: Vital Signs Monitors Mod. Multipar LCD and PM9000, Electrophysiology Polygraphs and Hemodynamic Polygraphs; all with manufacturing date of 2005 and later.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Oximeter sensor, reusable "Y" DB9M/G 3043 Feas Electrónica
Feas Electrónica reusable "Y" oximeter sensor DB9M/G 3043

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Adult Oximeter Finger Sensor DB9M/G Feas Electrónica 512F
Adult Oximeter Finger Sensor DB9M/G Feas Electrónica 512F

The Oximeter sensor is applicable to adult patients (weighing more than 30kg), for non-invasive measurement by continuous sampling of arterial oxygen saturation and pulse rate, in Oximetry Monitoring Systems. This sensor is designed to be used exclusively in Feas Electronica equipment.

It has a length of 1 meter.
Protection against liquids IPX1.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Sensor, Pediatric, Disposable, DB9M/G, Feas ELECTRÓNICA , 520P
Pediatric pulse oximeter sensor DB9M/G

The Oximetry sensor is used for pediatric patient (weighing between 10kg and 50kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1.



The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Sensor, Neonatal (< 3kg), Disposable, DB9M/G, Feas Electrónica 520N
Pulse Oximeter Sensor, Neonatal (< 3kg), Disposable, DB9M/G, Feas Electronica 520N

Oximetry sensor is used for neonatal patient (weight < 3kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Sensor, Infant ( 3kg - 20kg ), Disposable, DB9M/G, 520I
Pulse Oximeter Sensor, Infant ( 3kg - 20kg ), Disposable, DB9M/G, 520I

Oximetry sensor is used for infant patient (weighing between 3kg and 20kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Sensor, Pediatric, Finger, DB9M/G, Feas ELECTRÓNICA , 512H
Pulse Oximeter Sensor, Pediatric, Finger, DB9M/G, Feas ELECTRÓNICA , 512H

The Oximetry sensor is used for pediatric patient (weight: 10kg-30kg) to measurement of arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed for use only in feas ELECTRONICA equipments.

The length of the sensor cable is 1 m.
Protection against liquids: IPX1


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Lingual oximeter sensor DB9F for veterinary use Feas Electrónica
Lingual sensor, reusable clip type, for the non-invasive measurement of blood oxygen saturation of veterinary patients. It allows to visualize the oxygen saturation (SpO2), the pulse frequency and the plestographic curve. Exclusive use in Feas Electronica multi-parameter monitor , under supervision of trained staff.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Pulse Oximeter Sensor, Adult, Disposable, DB9M/G, Feas ELECTRÓNICA , 520A
Pulse Oximeter Sensor, Adult, Disposable, DB9M/G, Feas ELECTRÓNICA , 520A

This oximetry sensor is used for adult patients (weighing more than 30 kg) to measure arterial oxygen saturation and pulse rate, in oximetry monitoring systems. This sensor is designed to be used exclusively in Feas Electronica equipment.

It has a length of 1 meter.
Protection against liquids IPX1.


The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.
Oxygen sensor for FiO2, Feas Electrónica
Sensor used for the measurement of Fraction inspired by oxygen, this measurement is carried out by an electrochemical cell which useful life is of 2 years from the moment of its opening.

The Feas Electrónica O2 sensor is designed as an oxygen sensing element of the Multipar LCD and PM9000 Feas Electrónica Patient Monitor models and measures the oxygen concentration in gas mixtures breathed by the patient.
Use is limited to system monitoring and should be used only by qualified personnel.

The images shown are for illustrative purposes only and may differ from the actual product. Specifications are subject to change without notice.